IT3D
High quality 3D scanning is now available to everyone!
Obtain precise 3D models at home, at school, at the office, at the cultural center…
High quality 3D models
- Accuracy down to 0.05 mm
- 3D resolution down to 0.13 mm
- Texture capture
- 3D scanning of objects from 3 cm to 1.2 m
Quick and easy
- 5 minutes to prepare for scanning
- Plug and play
- Automatic calibration
- One-click scanning
- Easy and intuitive user interface
- Powered by USB
- Only 1 kg weight
- Includes protective case
Three scanning modes
Scanning on a rotary table
3D scan of an object on the turntable. When an object is rotated, its model fragments are automatically combined.
Scan with markers
Automatic alignment of model fragments is achieved with targets applied to the surface of an object. It is used to improve the accuracy of 3D scanning. Supports an external photogrammetry system.
Scan by geometry
It is used for 3D scanning of objects that cannot be scanned in any other way. For example, when scanning exhibits in museums. The fragments of the model obtained from different angles are combined according to the characteristics of the geometry of the surface of the object.
A wide range of processing capabilities
- Automatic and manual alignment with targets and without targets
- Hole filler
- Smoothing of object surfaces
- Reduction of the number of triangles
- Correction of mesh defects
- Automatic removal of small variations and noise
- Other professional functions of IT3D SCAN ScanCenter NG software
Compatible with any 3D printer
- Easy data export for 3D printing
- Adjusting the coordinate system for 3D printing
- Automatic mesh construction with hole filling
- Textured models ready for 3D printing
Export your 3D model to other software for further processing.
IT3D SCAN ScanCenter NG allows you to export 3D models in the most popular formats: STL, OBJ, PLY
3D scanner Approved by the Ministry of Education and Vocational Training
IT3D SCAN ONE is considered by the Spanish government as the best solution for the educational sector. The 3D scanner is part of the Classroom of the Future project developed by INTEF. This initiative seeks to promote present and future education based on updated technologies.
Technical specifications
| Scanning technology | structured light |
| FOV size, mm | 200 х 150 х 150 |
| Working distance, m | 0.3 |
| Accuracy, mm up to | 0.05 |
| 3D resolution, mm up to | 0.13 |
| Object size | From 3 cm to 1.2 m |
| Ability to capture texture | yes |
| Cameras resolution | 2MP |
| Modes alignment | by markers, by geometry |
| 3D mesh formats | STL, OBJ, PLY, WRL, ASCII |
| Power source for scanner | USB |
| Minimum computer requirements | Intel® Core™ i3/i5 1.8 GHz (Broadwell-based), 8 GB, HDMI, USB 3.0, USB 2.0 for a rotary table |
| Interface |
HDMI, USB 3.0 USB 2.0 for a rotary table |
| Supported OS | Windows 7/8.1/10 64bit |
| Rotary table | yes |
| Platform table diameter | 20 cm |
| Max rotary table load capacity | 20 kg / 44 lb |
| Power source for rotary table | 220 V – 12V/1A |
| Case dimensions | 410 x 330 x 170 mm |
| Weight | 1 kg / 2.2 lb |
| Full package in case weight | 5.5 kg / 12.1 lb |
| Certificats | CE |
| Warranty | 1 year |
